Drapery Hems And Weights

Drapery

Oct 25

Written By QC Team

Hems and weights are both tiny details in the grand scheme of things, however, such a small detail can do many things such as preventing billowing, aiding in the flow of the drapery and other variables. Read our descriptions to help figure out what might be best for you, your site, and your designs.

Bottom Hems

4” DOUBLE: Four inches of fabric folded over itself twice to strengthen the bottom construction.
2” DOUBLE: Two inches of fabric folded over itself twice and sewn closed. Used to accomplish a finished back when a lining is present and minimize visual appearance.
.5” CLEAN: Minimizes both yield and potential for pin holes at bottom hem.
.25” HANKIE: Allows just enough fabric to fold over the chain weight and sew it closed.

Side Hems

1.5” DOUBLE: One and a half inches of fabric folded over itself twice and sewn closed. Provides stability while minimizing visual presence.
PILLOW CASE: A special hem used with double sided drapes where visibility from both sides is a concern.
Z-FOLD A way to do a leading edge on a coated fabric to prevent pin holes.

Weights

.75” NYLON: Weight inserts at the bottom hem along the leading edge and subsequent seams of a drapery. Typically used with a blackout or over drape treatments to prevent puckering at vertical seams.
.25” CHAIN: Weight inserts into the bottom hem to maximize fold of sheer and minimize movement/billowing.

We hope this was and will be a useful resource for your next renovation! Download our card to ensure you’re set to make the best decisions. For more information, check out our post titled, “Understanding Hems and Weights!”

Download The Card