Power
The Plug and Play motorized system uses a traditional 3 prong plug to draw power from a wall outlet. Each motor requires its own connection of 110 volt direct power.
Location
If motor is to utilize existing power location, we will hide the cord behind drapery. If new outlet to be provided, we recommend placing it 5” inside of drapery width at same height of drapery.
Controls
Our wireless wall switches and remotes should be operated anywhere within 60 feet from the window. These battery operated controls can be surface mounted and no wires or connections are required.
We hope this post gave you some insight for your next project with Quiltcraft. We have put this information in a downloadable PDF card so you can print it and keep it for reference!
Visit us again for more educational material!
You might also like: Hardwired Roller Shades
Check Out More Motorization Resources