Pair a Wall Switch to Your Battery Drapes
Learn how to pair the wireless wall switch with your installed drape. The list of steps will be different depending on the type of motor specified for the drape (plug and play or battery-operated). We have made a list of the instructions on how to program the switch here. Take a look!
Steps:
Insert battery pack and listen for “beep” to indicate power on.
If programming a 1 channel switch, go to step 3. If 5 channel, Select a channel to link by pressing the appropriate channel button. The adjacent LED will light to indicate the channel has been selected.
Press and hold UP or DOWN buttons simultaneously until drape jogs once. Switch is now paired to the motor.
Test programming! Drape should open by pressing UP button and close when pressing DOWN button.
If direction is incorrect, press and hold STOP button until drape jogs once to modify direction. Repeat step 4 to confirm.
Using a paper clip, briefly press the Programming Button until drape jogs. All settings are now confirmed and programming is complete.
If programming multiple treatments (5 channel switch), repeat steps 1-6 for subsequent channels.
NOTE: When working with multiple motorized shades, power only the one being programmed.
Explore Similar Resources
