How To Program The Handheld Remote For Our Battery-Operated Drapes

Learn how to program the handheld remote and pair it with your Quiltcraft drape! Just remember that the steps to program your controls vary depending on the type of motor (plug and play vs. battery). Find the instructions here!

Steps:

  1. Insert battery pack and listen for beep to indicate power on.

  2. If programming a 1 channel remote, go to step 3. If 5 channel, select a channel to link by pressing the Channel Selector button. The LED will light to indicate the channel has been selected.

  3. Press and hold UP and DOWN buttons simultaneously. Drape will jog once. Remote is now paired to the motor.

  4. Test programming! Drape should open by pressing UP button and close when pressing DOWN button.

  5. If direction is incorrect, press and hold MY button until drape jogs once to modify direction. Repeat step 4 to confirm.

  6. Using a paper clip, briefly press Programming Button, located in the back of the remote, until drape jogs. All settings are now confirmed and programming is complete.

  7. If programming multiple treatments (5 channel remote), repeat sequence for subsequent channels .

NOTE: When working with multiple motorized shades, power only the one being programmed.


Explore Similar Resources
Previous
Previous

How To Program Wall Switch For Our Plug And Play Drapes

Next
Next

How To Program The Handheld Remote For Our Plug And Play Drapes